Research on casting technology of 49K2ΦA alloy ingots for stator cores of small electric generators for military applications

124 views

Authors

  • Nguyen Van Duong (Corresponding Author) Military Technical Academy
  • Nguyen Thanh Hung Military Technical Academy
  • Le Minh Duc Military Technical Academy
  • Luc Van Thuong Mechanical Research Institute

DOI:

https://doi.org/10.54939/1859-1043.j.mst.89.2023.160-165

Keywords:

Vacuum induction furnace; Soft magnetic alloy; 49K2ФA alloy; Smelting equipment.

Abstract

 In this paper, analysis and selection of technology and equipment for smelting 49K2ΦA alloy were conducted. Among the advanced smelting methods for 49K2ΦA alloy, smelting in a vacuum induction furnace is the most suitable, as it provides good control over the alloy's chemical composition and beneficial and harmful impurities. 49K2ΦA alloy ingots were made from technically pure Fe, Co, V and FeV80 master alloy with good quality and guaranteed chemical composition. The content of impurities (C, P, S) that adversely affect the magnetic properties of the alloy are all smaller than the Russian sample. Using industrial FeV80 master alloy for producing this alloy should be considered as it provides a slightly higher content of impurities with a lower cost of raw materials in comparison with using technically-purified vanadium. 

References

[1]. И.Б. Кекало Б.А. Самарин,“ Физическое металловедение прецизионных сплавов. сплавы с особыми магнитными сьойствами,” Москва “металлургия”, pp. 307-309, (1989).

[2]. E.P. Wohlfarth,“Handbook of Ferromagnetic Materials,” Vol. 2, North-Holland Publishing Company, pp. 168-170, (1980).

[3]. R.S. Sundar and S.C. Deevi,“Soft magnetic FeCo alloys: alloy development, processing, and properties,” International Materials Reviews, Vol. 50, No. 3, pp. 157-192, (2005). DOI: https://doi.org/10.1179/174328005X14339

[4]. A.A. Couto and P.I. Ferreira, “ Phase transformations and properties of Fe-Co alloys,” J. Mater. Eng.,Vol. 11, pp. 31-36, (1989). DOI: https://doi.org/10.1007/BF02833751

[5]. Yuan Yu et at.,”Soft magnetic alloy smelting production method,” CN Patent, No. 1594626A, (2005).

[6]. ASM Handbook,“Volume 15: Casting, Vacuum Induction Melting,”, pp. 1-8, (2008).

[7]. Cheryll Denise Pitt, “The microstructure and mechanical properties of FeCo alloys with various alloying additions,” Thesis submitted for the degree of doctor of philosophy, pp. 3-13, (1980).

[8]. Cohen Persiano, “Structure and physical properties of soft magnetic FeCo based alloys”, Thesis submitted for the degree of doctor of philosophy of the university of London, pp 7-9, (1986).

Published

25-08-2023

How to Cite

Nguyễn, V. D., T. . H. Nguyễn, M. . Đức Lê, and V. . T. Lục. “Research on Casting Technology of 49K2ΦA Alloy Ingots for Stator Cores of Small Electric Generators for Military Applications”. Journal of Military Science and Technology, vol. 89, no. 89, Aug. 2023, pp. 160-5, doi:10.54939/1859-1043.j.mst.89.2023.160-165.

Issue

Section

Research Articles

Categories