Effect of carbon black powder content on thermal, physical, and mechanical properties of carbon fabric reinforced phenolic composite
187 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.84.2022.133-139Keywords:
Thermal protection material; Ablative composites; Phenolic resin; Carbon black.Abstract
Using heat-resistant fiber-reinforced phenolic composite materials (carbon fiber, glass fiber, etc.) to protect the rocket motor from high temperature has confirmed its superiority thanks to its thermal insulation and high-temperature resistance. The improvement of thermal protection properties of materials to diversify the thermal protection material family is a growing trend. Accordingly, this paper focuses on determining the influence of the percentage of carbon nano powder (0-14%) on the thermal, physical and mechanical properties of carbon fiber/phenolic matrix composite (CPC) in order to find out the extent of reasonable proportion of carbon powder to improve thermal protection. The results indicated that the addition of carbon powder with a content of about 6–10% significantly improved the thermal protection efficiency of CPC materials. The determined thermophysical parameters are the basis for calculating and designing of solid rocket motor heat insulation layer.
References
[1]. Colonel Vijay Kumar† and Balasubramanian Kandasubramanian, “Advances in Ablative Composites of Carbon Based Materials: A Review”, American Chemical Society, (2019), DOI: 10.1021/acs.iecr.9b04625. DOI: https://doi.org/10.1021/acs.iecr.9b04625
[2]. Maurizio Natali, Jose Maria Kenny, Luigi Torre (2016), “Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review”, Elsiver, Volume 84, (2016). DOI: https://doi.org/10.1016/j.pmatsci.2016.08.003
[3]. Maurizio Natali, Marco Monti, Debora Puglia, José Maria Kenny 1, Luigi Torre, “Ablative properties of carbon black and MWNT/phenolic composites: A comparative study”, Elsiver, Composite: Part A, (2012). DOI: https://doi.org/10.1016/j.compositesa.2011.10.006
[4]. Kaihong Tang, Ailing Zhang, Tiejun Ge, Xiaofeng Liu, Xiaojun Tang , and Yongjiang Li, “Research progress on modification of phenolic resin”, Materials Today Communications, Elsevier, (2020), DOI: 10.1016/j.mtcomm.2020.101879. DOI: https://doi.org/10.1016/j.mtcomm.2020.101879
[5]. Đinh Văn Hiến, Trần Ngọc Thanh, Hồ Ngọc Minh, Nguyễn Tuấn Anh, Trần Xuân Tiến, “Nghiên cứu ép đáy bảo vệ nhiệt động cơ vũ khí FMV-T2 từ vật liệu composite cốt vải cacbon/nền phenolic”, Tạp chí nghiên cứu KHCNQS, số đặc san 10/2021, ISSN 1859-1043.
[6]. William B. Hall, “Standardization of the Carbon-Phenolic Materials and Processes”, NASA Grant No. NAG8-545 - Mississippi State University Mississippi State, (1988).
