DEVELOPMENT OF A LOW-COST 3-DOF MOTION BASE FOR VEHICLE SIMULATORS
204 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.75.2021.157-163Keywords:
3-DOF Motion Base; Vehicle Simulation; Mechanical Oscillation.Abstract
This paper presents development and an application of low cost 3-DOFs motion base, which can be applied in simulation systems to recreate the three most important movements of an object in space. The system uses common industrial components, allowing the system to work reliably but reduce costs, easy in maintenance and repair. This mathematical model is used to calculate the operating structure design, using dynamic simulation tools to help selection and testing structural parameters. The results can be applied to build the motion simulation system of driving cabin of vehicles.
References
[1]. A. Mahmoodi, M. Aminzadeh, M.B. Menhaj and M. SabzehParvar, “A Generalized Method for Determining Load Workspace of Spatial Parallel Mechanisms”, 2010 8th IEEE Int. Conf. on Control and Automation Xiamen, China, June 9-11, 2010.
[2]. K.F. Hulme, A. Pancotti, “Development of a virtual d.o.f. motion platform for Simulation and rapid synthesis”, American Institute of Aeronautics and Astronautics, 2014.
[3]. Albert S. J. Van Heerden, Raine Lidbetter, Leon Liebenberg, Edward H. Mathewsb and Josua P. Meyer, “Development of a motion platform for an educational flight simulator”, Int. Journal of Mechanical Engineering Education, October 2011.
[4]. Berkay Volkaner1, S. Numan Sozen1 and V. Emre Omurlu1, “Realization of a Desktop Flight Simulation System for Motion-cueing Studies”, International Journal of Advanced Robotic Systems, Turkey, 2016.
[5]. Daniel Martinez-Maradiaga, Edonis Raci, Matthias Luond, Gerrit Meixner, “Control of a Three Degree-Of-Fredom Motion Platform with a real Vehicle”, IFAC PaperOnline 52-19 (2019), Germany, 2019.
[6]. Chiew Y. S., Abdul Jalil M. K. and Hussein M., “Motion visualisation and control of a driving simulator motion platform”, Proceeding o/the 6th International Symposium on Mechatronics and its Applications (ISMA09), Sharjah, UAE, March 24-26, 2009.
[7]. Đặng Văn Mười, “Thiết kế, chế tạo rô bốt 4 bậc tự do mô phỏng chuyển động trên tàu thủy”, Luận văn cao học, Đại học Công nghệ-Đại học quốc gia Hà Nội, 2017.
[8]. QCVN 106:2020/BGTVT “Quy chuẩn kỹ thuật quốc gia QCVN 106:2020/BGTVT Thiết bị mô phỏng để đào tạo lái xe ô tô”, Bộ GTVT, 2020.
