STUDY ON MODIFICATION OF NANO ZIRCONIUM OXIDE WITH POLYDIMETHYL SILOXANE
147 viewsKeywords:
Nano zirconium oxide; PDMS; DMC; Modified ZrO2 nanoparticles.Abstract
Nano zirconium oxide (ZrO2) is widely used in many kind of industries to improve the mechanical properties as well as the heat resistance of materials. However, ZrO2 nanoparticles often tend to agglomerate together, so efficiency of ZrO2 nanoparticles is not as expected. This paper presents results of modifying ZrO2 nanoparticles with polydimethyl siloxane (PDMS). The study has pointed out the optimal reaction conditions included mass ratio between ZrO2/PDMS: 1/0.5 at 200 oC. Results of FT-IR infrared spectroscopy, X-ray energy scattering spectroscopy analysis,… showed that modified ZrO2 nanoparticles were grafted siloxane on surfaces. Modified ZrO2 nanoparticles have better dispersibility in xylene than unmodified ones. Therefore, the modified ZrO2 nanoparticles can be used in paint and glue manufacturing industries well.
References
[1]. Sarita Kangoa, Susheel Kaliab, Annamaria Celli, James Njugunad, Youssef Habibie, Rajesh Kumar, “Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review”, Progress in Polymer Science, Vol. 38 (2013), pp. 1232– 1261.
[2]. Mehdi Derradji, Tiantian Feng, Hui Wang, Noureddine Ramdani, Tong Zhang, Jun Wang, Abdelkhalek Henniche, Wen-bin Liu, “New oligomeric containing aliphatic moiety phthalonitrile resins: their mechanical and thermal properties in presence of silane surface-modified zirconia nanoparticles”, Iranian Polymer Journa, Vol. 25 (2016), pp. 503–514.
[3]. Takeshi Otsuka,Yoshiki Chujo, Poly(methyl methacrylate) (PMMA)-based hybrid materials with reactive zirconium oxide nanocrystals, Polymer Journal, Vol. 42 (2010), pp. 58–65.
[4]. M. Behzadnasab, S.M. Mirabedini, K. Kabiri, S. Jamali, “Corrosion performance of epoxy coatings containing silane treated ZrO2 nanoparticles on mild steel in 3.5% NaCl solution”, Corrosion Science, Vol. 53 (2011), pp. 89–98.
[5]. Mohammed M Gad, Reem Abualsaud, Ahmed Rahoma, Ahmad M Al-Thobity, Khalid S Al-Abidi, Sultan Akhtar, “Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material”, International Journal of Nanomedicine Vol.13 (2018), pp. 283–292.
[6]. Hoàng Thị Phương, Nguyễn Khánh Diệu Hồng, “Nghiên cứu chức hóa bề mặt vật liệu nanosilica, sử dụng để hấp thu dầu”, Tạp chí Khoa học và Công nghệ, Số 54 (2016), tr. 755-762.
[7]. V.M. Gun’ko, M.V. Borysenko, P. Pissis, A. Spanoudaki, N. Shinyashiki, I.Y. Sulim, T.V. Kulik, B.B. Palyanytsya, “Polydimethylsiloxane at the interfaces of fumed silica and zirconia/fumed silica”, Applied Surface Science, Vol. 253 (2007), pp. 7143–7156.
[8]. I. S. Protsak, P. O. Kuzema, V. A. Tertykh, Y. M. Bolbukh, R. B. Kozakevich, “Thermogravimetric analysis of silicas chemically modified with products of deoligomerization of polydimethylsiloxane”, Journal of Thermal Analysis and Calorimetry, Vol.121 (2015), pp. 547–557.
[9]. Masaki Okamotoa, Kuon Miyazakib, Akihiro Kadob, Sumiko Suzukib, Eiichi Suzuki, “Deoligomerization of cyclooligosiloxanes with dimethyl carbonate over solid-base catalysts”, Catalysis Letters, Vol. 88 (2003), pp. 115-118.
