Enhanced flame resistance of cellulose aerogel by ammonium polyphosphate for heat insulation
787 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.VITTEP.2022.15-22Keywords:
Microfibrillated cellulose; Pineapple leaves; Aerogel; Thermal insulation; Flame resistance.Abstract
Cellulose aerogels are a potential candidate for heat insulation, but one of their drawbacks is high flammability hindering their applications in practice. This study synthesized cellulose aerogels from microfibrillated cellulose fibers (MFC) extracted from discarded pineapple leaves. The procedure started with simply mixing the extracted fibers with polyamide amine-epichlorohydrin (PAE) as a chemical crosslinker and ammonium polyphosphate (APP) (10-20%) as a green and effectively flame-resistant additive, followed by freeze-drying. The produced aerogels are characterized in terms of their morphology, thermal stability and conductivity, and flame resistance via advanced and standardized methodologies including Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA), thermal conductivity measurement by a heat flow meter, and UL94 horizontal burning test. The flame-resistant cellulose aerogels exhibit ultra-low density (25.5-26.8 mg/cm3), high porosity (98.0-98.2%), excellent heat insulation (35.9-36.7 mW/m۰K), and are completely flame-resistant. In addition, the varied APP content (10-20%) shows little effect on the density, heat conductivity, and thermal stability of the flame-resistant cellulose aerogels in comparison with that of the neat cellulose aerogel. Based on the findings, the synthesized flame-resistant cellulose aerogels are considered a promising bio-based heat insulation material.
References
[1]. M. O. Ansari, A. A. P. Khan, M. S. Ansari, A. Khan, R. M. Kulkarni, V. S. Bhamare, "Advances in Aerogel Composites for Environmental Remediation," Elsevier, pp. 1-17, (2021). DOI: https://doi.org/10.1016/B978-0-12-820732-1.00001-1
[2]. H. Zhang et al., "Experimental Characterization of the Thermal Conductivity and Microstructure of Opacifier-Fiber-Aerogel Composite,", Molecules, Vol. 23, No. 9, (2018). DOI: https://doi.org/10.3390/molecules23092198
[3]. N. H. N. Do et al., "Heat and sound insulation applications of pineapple aerogels from pineapple waste," Materials Chemistry and Physics, Vol. 242, p. 122267, (2020). DOI: https://doi.org/10.1016/j.matchemphys.2019.122267
[4]. A.-R. Firatoiu et al., “Study on The Production and Marketing of Pineapples Worldwide,” Proc of the 37th International Business Information Management Association, 1-2 April 2021, Cordoba (2021).
[5]. M. T. T. Phan et al., "Investigation on Synthesis of Hydrogel Starting from Vietnamese Pineapple Leaf Waste-Derived Carboxymethylcellulose," J. of Analytical Methods in Chemistry, Vol. 2021 (2021). DOI: https://doi.org/10.1155/2021/6639964
[6]. C. T. X. Nguyen et al., "Nanocellulose from Pineapple Leaf and Its Applications towards High-value Engineering Materials," Chemical Engineering Transactions, Vol. 89, pp. 19-24, (2021).
[7]. N. H. Do et al., "Recycling of pineapple leaf and cotton waste fibers into heat-insulating and flexible cellulose aerogel composites," J. of Polymers and the Environment, Vol. 29, No. 4, pp. 1112-1121, (2021). DOI: https://doi.org/10.1007/s10924-020-01955-w
[8]. G. Liu, "Ammonium Polyphosphate-An Overview with Respect to its Properties, Environmental and Toxicological Aspects," Proc of the 4th International Conference on Bioinformatics and Biomedical Engineering, 18-20 June 2010, Chengdu, pp. 1-4, (2010). DOI: https://doi.org/10.1109/ICBBE.2010.5516557
[9]. S. Ahankari et al., "Recent developments in nanocellulose-based aerogels in thermal applications: a review," ACS nano, Vol. 15, No. 3, pp. 3849-3874, (2021). DOI: https://doi.org/10.1021/acsnano.0c09678
[10]. S. Josset et al., "Microfibrillated cellulose foams obtained by a straightforward freeze–thawing–drying procedure," Cellulose, Vol. 24, No. 9, pp. 3825-3842, (2017). DOI: https://doi.org/10.1007/s10570-017-1377-8
[11]. W. Yin et al., "Mechanically robust, flame-retardant poly (lactic acid) biocomposites via combining cellulose nanofibers and ammonium polyphosphate," ACS omega, Vol. 3, No. 5, pp. 5615-5626, (2018). DOI: https://doi.org/10.1021/acsomega.8b00540
[12]. M. Farooq et al., "Eco-friendly flame-retardant cellulose nanofibril aerogels by incorporating sodium bicarbonate," ACS applied materials & interfaces, Vol. 10, No. 32, pp. 27407-27415, (2018). DOI: https://doi.org/10.1021/acsami.8b04376
[13]. Y. Huang et al., "Flame-retardant polyvinyl alcohol/cellulose nanofibers hybrid carbon aerogel by freeze-drying with ultra-low phosphorus," Applied Surface Science, Vol. 497, p. 143775, (2019). DOI: https://doi.org/10.1016/j.apsusc.2019.143775
[14]. M. Luo et al., "Enhanced thermal insulation and flame-retardant properties of polyvinyl alcohol-based aerogels composited with ammonium polyphosphate and chitosan," International J. of Polymer Science, Vol. 2021, (2021). DOI: https://doi.org/10.1155/2021/5555916
[15]. Q. B. Thai et al., "Cellulose-based aerogels from sugarcane bagasse for oil spill-cleaning and heat insulation applications," Carbohydrate polymers, Vol. 228, p. 115365, (2020). DOI: https://doi.org/10.1016/j.carbpol.2019.115365
